SG/SGM:
Self-priming centrifugal pump, suitable for pure, water-like liquids. Equipped with lifetime-lubricated motor bearings. Shaft sealed by a mechanical seal. AC version with on/off switch in the terminal box, 1.5 m cable, and Schuko plug.
SGM-Speckmat:
Includes Speckmat 1 control unit for automatic, pressure-dependent start-up, flow-dependent shutdown, and integrated dry-run protection.
SG/SGM-DA:
Includes a 20 l stainless steel diaphragm pressure vessel, pressure gauge, and pressure switch for automatic start-up and shutdown.
Special versions
Special voltages
Special mechanical seals
Fluid:
Pure cold water, as well as fluids that do not chemically or mechanically attack the pump materials.
Areas of Application
Rainwater harvesting
Washing systems
Apparatus engineering
Shipping
Technical Data
Hydraulic power
| Flow rate | 4 m³/h |
| Förderhöhe | 50 mWS |
| Operating pressure max. | 6 bar |
Motor & drive
| Drehzahl | 2850 min⁻¹ |
| Motor phases | 1~ |
| Degree of protection | IP 54 |
| Insulation class | F |
Electrics
| Leistungsaufnahme P₁ max. | 1.39 kW |
| Leistungsabgabe P₂ max. | 0.88 kW |
| Spannung max. | 1~ 230 V |
| Input voltage | 0 V |
Energy efficiency
| Energy efficiency class | IE2 |
Connections & piping
| Connection, inlet / suction side | Rp 1¼ |
| Connection, discharge side | Rp 1 |
Operating conditions & water
| Umgebungstemperatur max. | 40 ° C |
| Medientemperatur max. | 0 ° C |
Materials
| Befüll- und Entleerungsstopfen | Stainless steel |
| Dichtring | NBR |
| Elastomere | NBR |
| Gehäuse | Stainless steel |
| Gehäusedeckel | Stainless steel |
| Gleitringdichtung | SiC / NBR |
| Laufrad | Stainless steel |
| Leitschaufeleinsatz / Leitapparat / Diffusor | GG-EN-JL 1040 with PE coating |
| Motorgehäuse | Stainless steel |
| Pumpenfuß | Stainless steel |
| Pumpengehäuse | Stainless steel |
| Welle | Stainless steel |
Downloads
BTA SG-SGM DE-EN 07-2025.pdfOperating Instructions
PDF
ETL SG SGM 200 02-2024.pdfParts ListsPDF
KL SG SGM 02-2025 1.pdfCharacteristic CurvesPDF
Ausschreibungstext SG - SGM.pdfTender SpecificationsPDF
Ausschreibungstext SG - SGM.docxTender SpecificationsDOCX
Ausschreibungstext SG - SGM.x81Tender SpecificationsX81
Ausschreibungstext SG - SGM[1].d81Tender SpecificationsD81
SGM 200 6400200038.pdfDatasheetsPDF
