Wet-running circulation pump with screw connection and stall-current-resistant synchronous motor.
Low power consumption of only 3 to 4.5 watts thanks to the synchronous motor.
Application range up to max. 20° dH.
Quick electrical connection via connector.
High-quality materials to protect against bacteria and corrosion.
Flexible service motor: quick replacement for common pump types.
Includes thermal insulation shell.
Includes check valve and ball shut-off valve.
Pump medium:
Drinking water up to 20° dH.
Areas of Application
Heating circulation
Pump control
Technical Data
Hydraulic power
| Flow rate | 0.4 m³/h |
| Head (min.) | 1 mWS |
| Operating pressure max. | 10 bar |
Motor & drive
| Speed (max.) | 2850 min-1 |
| Motor phases | 1~ |
| Degree of protection | IP 42 |
| Insulation class | F |
Electrics
| Power input P₁ (max.) | 5 kW |
| Voltage (max.) | 1~ 230 V ± 10 % |
| Input voltage | 230 V |
| Frequency | 50 Hz |
Connections & piping
| Connection, inlet / suction side | R 1/2 |
| Connection, discharge side | G 1 |
Operating conditions & water
| Temperature min. | 65 ° C |
Products
No articles are currently available for this product.