BADU® Eco Soft

The performance can be set in steps of 1 %. The pump makes full use of the motor at every... more
Product information "BADU® Eco Soft"

The performance can be set in steps of 1 %. The pump makes full use of the motor at every operating point. Three performance stages, as well as the suction time, can be programmed individually. The optimum setting for the most effective application and highest efficiency is guaranteed in each performance range. The BADU Eco Soft can be controlled potential-free and can be connected to our BADU Eco Logic pump control, BADU Logic 3 filter control, a timer or the building service engineering.

The pump is delivered ready for connection with a 5-wire control cable, cable and plug.

Field of application

Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level.


Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.

Pool equipment: Circulation pump
Pool size in m³: 30 - 90
Flow rate Q in m³/h: max. 28
Total head H in m WS: max. 22
Motor performance in kW (P2): max. 0.75
Strainer capacity in l: approx. 3
Strainer basket mesh size in mm: approx. 3.2 x 2.6
Pool type: Outdoor pool, Indoor pool, Natural pool/swimming pond
Installation: Built-in pool, Above ground pool
Pump casing: PP TV 20
Diffuser: PA 6 GF 15
Impeller: PA 66 GF 30
Strainer basket: PP
Mechanical seal: carbon / ceramic / NBR
Screws: stainless steel, galvanized
Intermediate housing: PP TV 40
Gland housing: PP TV 40
Glue socket: ABS
Lid: PC, transparent / PA 66 GF 30

The pumps, as described, can be used for pool water with a salt concentration of up to 0.5%, i.e. 5 g/l.

For higher salt concentrations please contact the company SPECK Pumpen.

Read, write and discuss reviews... more
Customer evaluation for "BADU® Eco Soft"
29 Dec 2016

Super solider Gesamteindruck, sehr leise, geringer Stromverbrauch bin voll zufrieden, sehr empfehlenswert!

Überzeugendes Produkt, klare Bedienungsanleitung, saubere Instruktion durch die Schwimmbadfirma. Zum Rückspülen wurde bei mir ein extra Schalter installiert, der die Pumpe auf Stufe 3 anlaufen lässt. Die Kombination von Stufe 1 bei geschlossener und Stufe 2 bei offener Abdeckung ist auch sehr sinnvoll, insbesondere im Winter, wenn während die Zusatnur die Zusatzheizung läuft.. Die beiden letzten Punkte stellen m.E. einen zusätzlichen Kaufanreiz dar und dürfen in Werbung und auf der Webpage auch deutlicher zum Ausdruck kommen.

Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.