This product range is suitable for the replacement of Pentair® “SuperFlo®" and Hayward® “Super Pump®" pumps with Rp 1½ connections and has the following perforamance features:
> Pump can be used for salt concentrations of up to 0.5 % (approx. 5g/l).
> Transparent lid for simple sight inspection.
> Lacquered motor.
> With usual simple connections.
> Easily serviceable 4-screw pump design with integrated handle for simple transport and installation.
> Every pump is 100 % performance tested before leaving the factory.
Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level.
Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.
|Pool size in m³:||30 - 180|
|Flow rate Q in m³/h:||8|
|Total head H in m WS:||8|
|Motor performance in kW (P2):||0.30|
|Strainer basket mesh size in mm:||approx. 3.2 x 2.6|
|Pump casing:||PP GF 30|
|Impeller:||PA 66 GF 30|
|Mechanical seal:||carbon / ceramic / NBR|
|Screws:||Galvanised steel / stainless steel|
|Intermediate housing:||PP GF 30|
|Gland housing:||PP TV 40|
|Lid:||PC, transparent / PP GF 30|
Special motors on request.
The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l.
For higher salt concentrations please contact the company SPECK Pumpen.