A classic in the BADU series, this pump is especially designed for medium-size, above ground pools, partially embedded pools and smaller swimming ponds. Thanks to the large pumping capacity, an automatic pool cleaner can also be attached.
Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level.
Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.
|Pool equipment:||Circulation pump|
|Pool size in m³:||30 - 90|
|Filter size in mm:||610 - 650|
|Flow rate Q in m³/h:||14|
|Total head H in m WS:||8|
|Motor performance in kW (P2):||0.65|
|Strainer capacity in l:||approx. 3|
|Strainer basket mesh size in mm:||approx. 3.2 x 2.6|
|Pool type:||Indoor pool, Outdoor pool|
|Installation:||Built-in pool, Above ground pool|
|Pump casing:||PP TV 20|
|Diffuser:||PP TV 40|
|Impeller:||PA 66 GF 30 / PC|
|Mechanical seal:||carbon / ceramic / NBR|
|Intermediate housing:||PP TV 40|
|Gland housing:||PP TV 40|
Special motors on request.
The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l.
For higher salt concentrations please contact the company SPECK Pumpen.
Also available in AK version