> Successful swimming pool pump with PM motor.
> Synchronous drive for external control units.
> Efficient circulation pump for large pools.
The pump is delivered ready for connection with a 5-wire control cable, cable and plug.
Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below the water level.
Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.
|Pool equipment:||Circulation pump|
|Pool size in m³:||210 - 500|
|Filter size in mm:||larger than 1100|
|Flow rate Q in m³/h:||105|
|Total head H in m WS:||10|
|Motor performance in kW (P2):||5.50|
|Strainer capacity in l:||approx. 10|
|Strainer basket mesh size in mm:||approx. 3.4 x 3.2|
|Pool type:||Indoor pool, Natural pool/swimming pond, Outdoor pool|
|Pump casing:||PP GF 30|
|Diffuser:||PP GF 30|
|Impeller:||PPE GF 30 / PP GF 30|
|Mechanical seal:||carbon / ceramic / NBR|
|Intermediate housing:||PP TV 40|
|Gland housing:||PP TV 40|
|Impeller nut:||PP GF 30|
|Lid:||PC, transparent / PA 66 GF 30|
Opening device is included in delivery.
The pumps, as described, can be used for pool water with a salt concentration of up to 0.5%, i.e. 5 g/l.
For higher salt concentrations please contact the company SPECK Pumpen.