Swimming pool pumps with consistently high quality optics for the pump houisng and motor block provide an exclusive product design. Through elaborate flow studies and tests, we were able to design new, highly efficient hydraulics. Thus we can acheive significantly higher capacities than with previous ranges, making this range extremely efficient. What's more, we also have a variable speed variation with proven controls.
The pump is delivered ready for connection with a 5-wire control cable, cable and plug.
Products in the BADU Profi series are only available via specialist retailers. Their high quality and technical demands require specialist knowledge for the planning and installation.
Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level.
Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation.
|Pool equipment:||Circulation pump|
|Pool size in m³:||30 - 180|
|Filter size in mm:||larger than 1100|
|Flow rate Q in m³/h:||max. 37|
|Total head H in m WS:||max. 17|
|Motor performance in kW (P2):||1,40|
|Strainer capacity in l:||ca. 4|
|Strainer basket mesh size in mm:||ca. 2,2 x 2,2|
|Pool type:||Indoor pool|
|Pump casing:||PP GF 30|
|Diffuser:||PA 66 GF 30|
|Impeller:||PP GF 30|
|Mechanical seal:||carbon / ceramic / NBR|
|Intermediate housing:||PP GF 30|
|Gland housing:||PP GF 30|
|Lid:||PC, transparent / PA 66 GF 30|
Special motors on request.
The pumps, as described, can be used for pool water with a salt concentration of up to 0.5%, i.e. 5 g/l. For higher salt concentrations please contact the company SPECK Pumpen.