The introductory model for small to medium-size filter units offers an economical and reliable solution for above ground pools. Tried and tested, this pump reaches a high rate of efficiency during constant operation.
Swimming pool water circulation through a filter system. The pump can be installed max. 2 m above or max. 3 m below water level.
Monoblock-type pump with integrated strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water providing complete electrical separation.
|Pool equipment:||Circulation pump|
|Pool size in m³:||10 - 60|
|Filter size in mm:||500 - 610|
|Flow rate Q in m³/h:||11|
|Total head H in m WS:||8|
|Motor performance in kW (P2):||0.45|
|Strainer capacity in l:||approx. 0.5|
|Strainer basket mesh size in mm:||approx. 2.8 x 2.8|
|Pool type:||Outdoor pool|
|Installation:||Built-in pool, Above ground pool|
|Gland housing:||PP TV 40|
|Impeller:||PA 66 GF 30 / PC|
|Mechanical seal:||carbon / ceramic / NBR|
|Screws:||stainless steel 1.4301|
Special motors on request.
The pumps, as described, can be used for pool water with a salt concentration of up to 0.5%, i.e. 5 g/l.
For higher salt concentrations please contact the company SPECK Pumpen.
Also available in AK version