Solid monoblock-type pump with large strainer tank. For attractions and creative water ideas.
Swimming pool water circulation in filter systems, flooded suction up to a flow rate of 56 m³/h.
Monoblock-type pump on base plate with attached strainer tank. The bellow-type mechanical seal is mounted on a plastic shaft protector sleeve.
|Pool size in m³:||150 - 180|
|Flow rate Q in m³/h:||45|
|Total head H in m WS:||12|
|Motor performance in kW (P2):||3.00|
|Strainer basket mesh size in mm:||approx. 3.40 x 3.20|
|Gland housing:||PPE GF 30|
|Mechanical seal:||carbon / ceramic / NBR|
|Screws:||stainless steel 1.4301|
|Impeller nut:||PP GF 30|
|Wear ring:||Stainless steel 1.4301|
|Motor shaft:||Stainless steel 1.4057|
|Strainer tank:||PP TV 40|
|Knob:||PA 6 GF 30|
Single phase motors and special motors on request.
The above mentioned pumps can be used for pool water with a salt concentration of up to 0.5%, i.e. 5 g/l.
For higher salt concentrations please contact the company Speck Pumpen.