> Without mechanical seal
> Motor display with intuitive control
> Low energy consumption
> Especially quiet and efficient
> Newly configured hydraulics
> Transparent lid with LED lighting
> PVC connection pieces
> Interior drain plugs, thus no danger of breakage
> Efficient energy saving due to permanent magnet motor
> External control via potential-free contacts e.g. with the BADU Eco Logic
Products in the BADU Delta series are only available via specialist retailers. Their high quality and technical demands require specialist knowledge for the planning and installation.
Swimming pool circulation through a filter system. The pump can be installed max. 3 m above or below the water level.
Monoblock-type pump with integrated strainer tank. Motor/pump shaft has no contact with the pool water, providing complete electrical separation.
|Pool equipment:||Circulation pump|
|Total head H in m WS:||8|
|Motor performance in kW (P2):||1.10|
|Strainer capacity in l:||ca. 4|
|Strainer basket mesh size in mm:||ca. 2,2 x 2,2|
|Pool type:||Indoor pool|
|Pump casing:||PP GF 30|
|Impeller:||PPE GF 30|
|Mechanical seal:||carbon / ceramic / NBR|
|Intermediate housing:||PP GF 30|
|Lid:||PC, transparent / PA 66 GF 30|
Special motors on request.
The pumps, as described, can be used for pool water with a salt concentration of up to 0.5%, i.e. 5 g/l. For higher salt concentrations please contact the company SPECK Pumpen.